upper part of the front of a transmitter.
If the power switches are turned off in the opposite order, the model may unexpectedly run out of control and
cause a very dangerous situation.
1. Throttle stick to the low (F/S) position.
2. Turn on the transmitter power switch.
3. Turn on the receiver or motor controller switch.
ON
ON
THR LOW
Throttle Stick Low
(F/S position)
LED
Low Battery
Power Down Mode
Link Mode
Always be sure the motor/engine is stopped.
1. Turn off the receiver or motor controller switch.
2. Then turn off the transmitter power switch.
OFF
Status
ON
ON the Power Switch
OFF
LED
Solid
Once 0.25s ON - Once 0.25s OFF
Once 0.5s ON - Once 0.5s OFF
Once 1s ON - Once 1s OFF
13