Connecting Cables, Install Ink Cartridge And Powering On The Unit - Digital Check SmartSource SSM1-MICROELITE-SEIJ Installation And Operation Manual

Installation & Operations Guide - SmartSource Micro Elite IJ

Connecting cables, install ink cartridge and powering on the unit

1. Locate the power supply and AC line cord.
Note: Use only the power supply that was packed with your SmartSource Micro Elite IJ. Do not
exchange power supplies between units, or use non-Digital Check-supplied power supplies, even if
they look similar.
2. Plug the power cable connected to the power supply into the SmartSource Micro Elite IJ, and then plug the AC line
cord into the power supply-the other end into an AC outlet.
Rev. 022720
Plug into
scanner
8227 5727-003
Plug into Power
supply
Page 9 of 27