Processing Documents; Removing Items From Output Area - Digital Check SmartSource SSM1-MICROELITE-SEIJ Installation And Operation Manual

Installation & Operations Guide - SmartSource Micro Elite IJ
For best performance and fewest problems, the document should be inserted into the feed area with the leading and
lower edges aligned as consistently as possible, and with the leading edge aligned with the line printed on the cover.
If the bottom edge is not aligned, the unit may not be able to read the code line, and document images may be skewed.

Processing documents

When a document is placed in the feed area, the unit may begin processing automatically, or you may need to press the
start-stop button briefly to start processing. How this works depends on your document processing software application.
The document will be fed singly from the feed area and stopped in the output area. To continue processing, place another
document in the feed area. Depending upon your application, the unit may resume processing automatically, or you may
need to press the start-stop button again to resume.

Removing items from output area

Pull document out of the output as shown. The document will stop in the last pinch of the drive.
Pull out document in direction shown
Rev. 022720 8227 5727-003 Page 16 of 27