Table of Contents
Advertisement
USBAdvisor User Manual
Pin-Outs for the Data In/Out Connector
Table lists the pin-out and signal descriptions for the Data In/Out connector on a cable
that connects to the Breakout Board.
Data In/Out Connector – Pin-Out
Pin
1
2
3
4
5
6
7
8
9
Note:
Prototype Rework Area
The Breakout Board contains a prototype rework area for making custom circuits for rapid
development. The area consists of plated-through holes, 20 columns wide by 27 rows
long. The top row of holes is connected to GND and the bottom row is connected to +5V.
The remaining holes are not connected. Use the rework area to insert custom
components and wire-wrap their respective signal, power, and ground pins.
PC Connection
Use the LONGEST (6-foot/2-meter) of the five USB cables provided to connect the host
computer to the Advisor Analyzer box.
LeCroy Corporation
Signal Name
Signal Description
+5V
+5 Volts, 250mA DC source
TRG IN
(*) Trigger Input
GP IN
(*) General Purpose Input
TRG OUT
(*) Trigger Output
GP OUT
(*) General Purpose Output
GND
Ground
GND
Ground
GND
Ground
GND
Ground
Pins 2 and 3 have the same function: they allow external signals to be
(*)
used to cause triggering or recording. Pins 4 and 5 are used to transmit
output signals.
Chapter 2: General Description
13
Advertisement
Table of Contents
