External Interface Breakout Board - LeCroy Advisor User Manual

Chapter 2: General Description
Host Compatibility
The instrument works with any PC equipped with a functioning USB port and running a
Microsoft Windows 2000, Windows XP, Windows Vista 32, or Windows Vista 64
operating system. Note: Support for Windows 2000 will end on January 1, 2008.

2.6 External Interface Breakout Board

The External Interface Breakout Board is an accessory that allows convenient access to
several potentially useful standard, fast TTL output and input signals. It also offers a
simple way to connect logic Analyzers or other tools to the Advisor Analyzer unit. Four
ground pins and one 5-volt pin are provided.
The Breakout Board connects via a cable to the Data In/Out connector located on the
rear of the Analyzer box. Each signaling pin is isolated by a 100Ω series resistor and a
buffer inside the Analyzer box.
12
Figure 2.3 External Interface Breakout Board
Figure 2.4 Data In/Out Connector (on cable)
USBAdvisor User Manual
LeCroy Corporation