Connecting Counters To Events - LeCroy Advisor User Manual

USBAdvisor User Manual

11.5 Connecting Counters to Events

The center section of the Actions window displays two Counter buttons marked Count1
and Count2.
Counters provide a way of triggering after a number of events have passed, such as
"Trigger after the 20th IN packet."
Counters have blue dots in their top left corner that provide access to pop-up menus. The
menus provide the means of setting the counter value. The counter can be set between
1 and 65,535.
To connect an event to a counter:
Step 1 Open the Event window and select an Event.
Step 2 Open the Actions window.
Step 3 Click the Event button.
Step 4 Click one of the two counters.
LeCroy Corporation
Selecting an Event causes an Event button to automatically appear in the
Actions window.
The window displays an Event button that is connected to the Trigger button on
the right via a line.
An arrow appears that connects the Event button to your mouse pointer.
The Event automatically connects to the Counter button and then connects to the
Trigger button.
Chapter 11: Recording Options
129