Chapter 4: Detailed Installation
4.4 Advisor Program Installation
The LeCroy Advisor software is provided on CD-ROM and requires a
Microsoft Windows 2000, Windows XP, Windows Vista 32, or Windows Vista 64
operating system. Note: Support for Windows 2000 will end on January 1, 2008.
Loading the Advisor USB Drivers
Step 1 Insert the Advisor CD-ROM into your computer.
Step 2 Power-on the Advisor Analyzer.
Step 3 Connect the USB cable to the rear of the Analyzer and to the personal computer.
Step 4 When Windows prompts you for a file, browse to the CD-ROM.
Installing the Advisor Application Program
To install the Advisor program, follow these steps:
Step 1 Insert the Advisor CD-ROM into your computer.
Step 2 Click Install Software.
Step 3 Follow the installation instructions on your screen.
The Install Wizard automatically installs the necessary files to the computer's hard drive.
Advisor software is installed in the C:\Program Files\LeCroy\Advisor directory unless
you specify otherwise. Follow the installation instructions on your screen.
24
The host operating system detects the Analyzer and begins to install the USB
driver.
USBAdvisor User Manual
LeCroy Corporation