Searching Traces; Go To Trigger - LeCroy Advisor User Manual

USBAdvisor User Manual
Chapter 7: Searching Traces
The Search feature provides options for searching recorded traffic to find specific packets
based on triggering status, packet number, marking, or content.
To view the Search options:

7.1 Go to Trigger

Note:
To display a Trigger Event:
The Trace View is repositioned to the first packet following the Trigger event. This packet
is at the top of the screen.
LeCroy Corporation
• Click Search in the Menu bar to display the Search drop-down menu.
Go to Trigger is enabled only when a trigger has created the traffic file.
• Select Go to Trigger under Search on the Menu Bar.
Chapter 7: Searching Traces
65