Fuser Cleaner - Brother HL-2400Ce Series User Manual

Fuser Cleaner

Fuser Cleaner Message
When the following message appears on the LCD panel, you will need a
replacement Fuser Cleaner:
Fuser Cleaner Change Message
When the following message appears on the LCD panel and the printer
stops printing, you must replace the Fuser Cleaner:
Replacing the Fuser Cleaner
The Fusing unit and the parts around it are HOT! Be sure to wait
until the Fusing Unit has cooled sufficiently before replacing the
Fuser Cleaner.
If you touch the HOT parts, you might get injured.
1. Press the Power button to turn the printer off and wait until it has
cooled down sufficiently.
2. Open the Top Cover.
3. Release the Oil Bottle Lock Levers on both sides as shown below:
REPLACE FCR
24 CHANGE FCR
Warning
Fig. 5-8 Release the Levers
CHAPTER 5 MAINTENANCE
5-9