3. Secure the connection to the printer with the wire clips or screws.
Serial Interface Port
Secure connection with screws.
Computer
Parallel Interface Port
Secure connection with wire clips.
Fig. 2-21 Connecting the Printer and Computer
4. Attach the other end of the interface cable to the interface connector
on your computer. Be sure to tighten the connection on the computer
as well.
Note
When you connect to a network, you can use Brother NC-3100h or NC-
2010h/NC-2100h Network cards. For the details, refer to the Network
User's Guide.
CHAPTER 2 SETTING UP THE PRINTER
Printer
2–15