14.
When you enter the character set setting mode, the display first
shows the current character set with an asterisk.
Note
The character set varies according to the current emulation mode.
15.
Press the
or
appears on the display.
See
"List of Symbol/Character
Press the Set button to make the displayed selection effective.
16.
Then the display shows the next menu.
Press the Set button to start printing the code table of the
17.
selected font, or press the
Then the display shows the exit menu.
Press the Set button to exit from the setting mode.
18.
The printer returns to the off-line state.
button until the character set you want
Sets".
or
button to skip this menu.
CHAPTER 4 CONTROL PANEL
4–57