Turning The Printer On - Brother HL-2400Ce Series User Manual
Brother color laser printer user's guide hl-2400ce
Hide thumbs
Also See for HL-2400Ce Series:
- Quick setup manual (4 pages) ,
- Technical reference manual (517 pages) ,
- Service manual (344 pages)
Table of Contents
Advertisement
USER'S GUIDE
Turning the Printer On
2–16
Installing the Power Cord and Turning the Printer On
Make sure that the Power button is turned OFF. The power
1.
button is on the front left side of the printer.
2.
Attach the power cord to the printer and plug it into an AC
outlet.
Fig. 2-22 Plugging in the Power Cord
3. Turn the printer on by pressing the Power Button.
!
Caution
Check the AC voltage. This printer should be operated at the specified
voltage and frequency.
• USA and Canada:
• Europe, Australia and others:
Since this printer must be electrically grounded, the power cord
should be connected to a grounded AC outlet.
The total length of the power cord, including extension cords, should
not exceed 5 meters (16.4 feet). Use of a longer power cord may result
in reduced voltage or malfunctions.
Do not unplug the power cord to turn off the printer.
The printer should be installed near a power outlet that is easily
accessible.
AC 120 V, 50/60 Hz
AC 220 to 240 V, 50/60 Hz
Advertisement
Table of Contents
