Brother HL-2400Ce Series User Manual page 79

MODE Button Settings in HP-GL Mode
The following table shows all the selections you can choose with the
Mode button in the HP-GL mode.
Note
The mode menus and settings that appear will vary according to the
current emulation mode, printer status and any options that may be
installed in the printer.
Mode Menu Setting Menu
INTERFACE MODE
Same as PCL5C Mode
FORMAT MODE PAGE FORMAT MODE
GRAPHICS MODE
exit
RESOLUTION MODE RESOLUTION
HRC SETTING
exit
Sub-Setting Menu
Same as BR-Script mode
PEN SETTING
SETTING=PEN1
SIZE #=3 dots
GRAY #=100%
exit
exit
CHARACTER SET
STANDARD SET
ANSI ASCII
ALTERNATE SET
ANSI ASCII
exit
RESOLUTION=600
HRC=MEDIUM
CHAPTER 4 CONTROL PANEL
Setting
PEN1 to 6
(Set size and gray
percentage for the selected
pen. )
1 to 10 dots (pen size in
dots)
(# is the selected pen
number. )
15, 30, 45, 75, 90, or 100%
(# is the selected pen
number. )
Exit to SETTING=PEN1–6
Exit to GRAPHICS MODE
Standard character set
See character sets in
Appendix
.
Alternate character set
See character sets in
Appendix.
.
Exit to GRAPHICS MODE
Exit to FORMAT MODE
300 or 600 dpi
OFF, LIGHT, MEDIUM, or
DARK
Exit to RESOLUTION MODE
4–15