Brother HL-2400Ce Series User Manual page 89

The following settings can be made in this mode:
Display Message
PAPER
LEFT M
RIGHT M = 80C P
TOP M
BOTTOM M=0.5" P
LINES
The letter "P" in the display messages indicates that the page orientation
is portrait. The letter "L" is displayed when it is landscape.
Display Message
X OFFSET= 0
Y OFFSET= 0
Page Format Mode
Set cut sheet paper size to letter, A4, legal, B5,
=LETTER
A5 or executive, or envelope size to JIS B5,
COM10 or DL.
Set the left margin at column 0-126 at 10cpi.
= 0C P
Set the right margin at column 10-136 at 10cpi.
See "List of Factory Settings" in this chapter.
Set the top margin at a distance from the top
=0.5" P
edge of the paper: 0, 0.33 (Non-HP), 0.5 (HP),
1.0, 1.5, or 2.0 inches.
Set the bottom margin at a distance from the
bottom edge of the paper: 0, 0.33 (Non-HP), 0.5
(HP), 1.0, 1.5, or 2.0 inches.
= 60L P Set the number of lines per page from 5 to 128
lines. See "List of Factory Settings" in this
chapter.
Page Format Mode (Continued)
Move the print start position (at the upper left corner on pages)
horizontally up to -500 dots to the left or +500 dots to the right
in 300dpi dot unit increments: factory setting = 0.
Move the print start position (at the upper left corner on pages)
vertically up to -500 dots downward or +500 dots upward in
300dpi dot increments: factory setting = 0.
CHAPTER 4 CONTROL PANEL
4–25