Font Button - Brother HL-2400Ce Series User Manual

USER'S GUIDE

FONT Button

4–50
Pressing the Font button allows you to select fonts and symbol/character
sets.
Notes
When you use the Font button, note the following:
The Font button is effective in the HP PCL5C, EPSON FX-850, and
IBM Proprinter XL modes. However the settings are subject to the
current emulation mode. Note that the Font button does not work in
the BR-Script 2 mode.
If the application software supports font and symbol/character set
selection, you do not need to set them with the Font button. The
software or command setting overrides the button setting.
If you want to use optional fonts instead of the printer's resident fonts,
be sure to install a font cartridge/card that has your preferred fonts.
The printer automatically selects the font that has exactly the same or
similar characteristics as those you set through the software or with a
command. If the installed font cartridge/card happens to have a font of
similar characteristics, the printer will print with an unexpected font.
You can store the fonts you require on a flash memory card or HDD
card only in the HP PCL5C mode or BR-Script 2 mode when a card is
installed. See "DEVICE OPERATION."
Setting the Font and Symbol Set in the HP PCL5C Mode
When the HP PCL5C emulation mode has been selected, the font and
symbol set can be set separately as the primary or secondary font.
When the primary font is selected;
Message
SELECT FONT P
SYMBOL SET P
TABLE PRINT P
When the secondary font is selected;
Message
SELECT FONT S
SYMBOL SET S
TABLE PRINT S
To do:
Set the primary font
Set the symbol set
Print the code table
To do:
Set the secondary font
Set the symbol set
Print the code table