CHAPTER 4 CONTROL PANEL
CONTINUE Button
If there is a problem with the printer, it automatically suspends printing
and goes off-line. Pressing the Continue button may ignore the error and
resume printer operation.
The function of this button varies according to the CONTINUE mode set
with the Mode button.
Since the CONTINUE mode has been factory set to MANUAL, you need
to press the Continue button to recover from a printer error message. If
you set the mode to AUTO, the printer attempts to resume the printing
operation without the need to press the Continue button.
For more information, see
"CONTINUE MODE"
in this chapter.
Note
The Continue button is not a cure-all. The printer cannot recover from
some errors. Take corrective action, referring to the error message. See
"TROUBLESHOOTING" in Chapter
6.
4–63