Brother HL-2400Ce Series User Manual page 77

Mode Menu
INTERFACE MODE
Same as HP PCL5C Mode
FORMAT MODE
RESOLUTION MODE
DEVICE OPERATION
DEVICE1
DEVICE2
DEVICE3
exit
DEVICE OPERATION
DEVICE1 EXECUTE DATA
DEVICE2
DEVICE3
MODE Button Settings in BR-Script 2 Mode
The following table shows all the selections you can choose with the
Mode button in the BR-Script 2 mode.
Note
The mode menus and settings that appear will vary according to the
current emulation mode, printer status and any options that may be
installed in the printer.
Setting Menu Sub-Setting Menu
PAGE FORMAT MODE PAPER=LETTER
(For 120V model)
PAPER=A4
(For 220/240V model)
X OFFSET=0
Y OFFSET=0
exit
COLOR MODE Same as PCL5C mode
exit
RESOLUTION RESOLUTION=600
CAPT SETTING CAPT=ON
HRC SETTING HRC=MEDIUM
exit
When the commercial flash memory card or the HDD card has not been formatted:
FORMAT DEVICE
Exit
When the commercial flash memory card, HDD card or optional HDD has been formatted:
DATA ID=#####
DEVICE LIST
SAVE SAVE DATA
Exit
DELETE MACRO ID=#####
DATA ID=####
FONT ID=#####
FORMAT DEVICE
exit
Setting
LETTER, LEGAL, A4, A5, B5,
JIS B5, EXECUTIVE, COM10,
and DL
-500 (left) to +500 (right) dots
-500 (down) to +500 (up) dots
Exit to PAGE FORMAT MODE
Exit to PAGE FORMAT MODE
300 or 600 dpi
ON or OFF
OFF, LIGHT, MEDIUM, or DARK
Exit to RESOLUTION MODE
Format the flash memory card,
HDD card or optional HDD.
Exit to DEVICE OPERATION
Execute the data on the DEVICE.
Execute the selected data.
Print the contents of the DEVICE.
Send data to be saved.
SET KEY--> END End saving the data.
DATA ID=##### Set data ID for saved data.
Exit to DEVICE OPERATION
Delete the selected macro.
Delete the selected data.
Delete the selected font.
Format the DEVICE.
SET –> DELETE ALL Execute formatting the DEVICE.
Exit Exit FORMAT DEVICE
OPERATION
Exit to DEVICE OPERATION
CHAPTER 4 CONTROL PANEL
4–13