Brother HL-2400Ce Series User Manual page 154

3. Release the Oil Bottle Lock Levers as shown below:
Fig. 5-5 Release the Oil Bottle Lock Levers
4. Remove the empty Oil Bottle from the Fusing Unit. Hold a sheet of
paper under the Oil Bottle and lift it out of the Fusing Unit. Move the
bottle toward the right hand side of the printer, so that the oil will not
spill into it.. Be careful not to spill oil inside the printer. It could cause
considerable damage to the printer.
Fig. 5-6 Take the Oil Bottle out
CHAPTER 5 MAINTENANCE
5-7