Create An Internal Paging Group - NEC SL1000 Getting Started Manual

SL1000 Getting Started Guide

Create an Internal Paging Group

You may want to change this setting if:

You want to make a paging call. The paging will be broadcast out of the loudspeakers of the SL1000
system phones.
Paging is useful if you have staff that leave their desk and you need to contact them.
System Operation:
You add the SL1000 system phones into a paging group. There are 32 paging groups available.
Program31-02-01
Place the telephones into paging groups. You can only broadcast the paging call out of the loudspeakers of
SL1000 system phones, not Analog telephones.
Default Setting:
None of the telephones are in a paging group.
1. After Log-In to the Programming Mode.
If you already Log-In the programming mode, skip this operation.
2. Dial 31 02 01, For each telephone enter the paging group number
(0-32, enter 0 to remove the phone from a group), you can overwrite the
current entry and Press Hold key to confirm the entry and step to the
next option.
3. Enter 1 to place the telephone in the Internal All Call Page option.
4. Press Mute key several times when you are done to return to the
Program Mode.
5. Press Speaker key to save changes and exit if you are finished.
See Also:
There are no related settings.
Configuration Sheet:
With defaults shown.
Telephone Page Group
Number
31-02-01
default=0 None
200
201
202
203
204
205
206
207
For the other features, refer the Features & Specifications Manual (Separate Issue).
Operation
All call
page
31-02-02
default=0 No
43
Display shows;
Program Mode
31-02-01 TEL200
INT PG GP No 0
31-02-02 TEL200
INT All Call PG0