Built-In Battery - Saadat Dena User Manual

Electrocardiograph
Hide thumbs Also See for Dena:
Table of Contents

Advertisement

4. Built-in Battery

The electrocardiograph is equipped with a rechargeable battery. The battery will charge
automatically once you connect the system to the AC INPUT (whether the device is on or off).
When the battery is fully discharged, it takes about 5 hours to charge it. The system can run on a
fully-charged battery when the power cord is unplugged. Different types of the batteries used in
the system and their charge time are specified in "Technical Specification" section.
If the battery is discharged in less than 1 hour, contact your
after-sales service to replace it.
The icon
in the Header Area indicates the battery charge level. The table below illustrates the
icon in different conditions.
Icon
The battery disconnection
The battery is charging
The device is plugged in
25% charged,the device is plugged in
50% charged, the device is plugged in
75% charged, the device is plugged in
100% charged,the device is plugged in
Battery status
25% charged
50% charged
75% charged
100% charged
14
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dena 1210

Table of Contents