Saadat Dena User Manual page 46

Also, trolley (if applicable) should be cleaned and disinfected after each patient or when
necessary, using a soft, clean cloth soaked in mild soapy water and, if necessary,
Isopropyl alcohol, and then wiped with a dry cloth.
1) To avoid damaging of the ECG cable, lead wires and electrodes do not immerse it in
any liquid.
2) Disposable accessories shall not be sterilized or reused.
3) To prevent environmental pollution, the disposal of single-use accessories shall be
done in accordance with the policies of the hospital.
 Recorder
Accumulation of paper powder or foreign matter between the thermal head and platen
roller deteriorates the print quality. Clean the head elements and platen roller surface
using alcohol and a cotton swab. Wait until the alcohol dries then close the recorder door.
Do not clean the recorder immediately after recording because thermal head and
its surrounding area are hot during and after recording.
The following table summarizes the methods of cleaning, disinfecting and sterilizing different
parts of the device:
41