Commissioning; Operation; Maintenance And Repair - Bosch Rexroth 2THE5R Instruction Manual

18/24 2THE5R, 4THE5NR, 4TH5NR | Commissioning
Bosch Rexroth AG, RE 29698-01-B/2021-06-22

8 Commissioning

During all work for commissioning the pedal, observe the general
safety instructions and intended use detailed in chapter 2 "Safety instructions"
from page 7 on.
▶ When commissioning the pedal, the machine may pose unforeseen dangers.
Before commissioning the system, you must therefore ensure that the vehicle
and the hydraulic system are in a safe condition.
▶ Commission the machine and check the correct functioning of the pedal
(e.g. direction of movement and correct messages or output levels).

9 Operation

This product is a component which requires no settings or changes during
operation. For this reason, this chapter of the manual does not contain any
information on adjustment options. Use the product only within the performance
range specified in the technical data.

10 Maintenance and repair

Dangerous malfunctions!
Opening the product could result in a loss of neutral point and unwanted
movement!
▶ Do not touch the neutral setting screws.
▶ Do not open the spring package, this could damage the electronics.
DANGER