Standard Installation Cables - Futurecom DVR-LX Installation Manual

Standard Installation Cables

The following table outlines all of the cables that are needed for installation. It identifies
the cable part number, length, connector types, and a description of what the cable
connects together. All cables are provided at time of order except the auxiliary cable
with cross-band configurations. The ordering code is provided for this optional cable, if
needed. There is also a reference number for each cable that is used throughout the
configuration drawings.
Ref PN
#
1 7W083X05-01
2 7W083X06-01
3 1W083A01-01
4a 7W083X17-01
4b 7W900X94-02
5 7W900X04-02
6 7W083X16-01
7 7W083X09-01
8
8M093X01 R1.0
Length Connectors
3ft 20-Pin to DB25 Male
2.5ft 9-Pin to DB15 Female
18ft
RA Mini UHF Male to
3ft
RA Mini UHF Male
RA QMA to RA Mini
3ft
UHF
RA TNC Male to RA
2.5ft
TNC Male
RA Mini UHF Male to
3ft
RA Mini UHF Male
15-Pin Male to 9-Pin
1ft
Female
Control Head cable provided by Motorola
Description
DVR-LX to MSU Control Cable
NOTE: Custom lengths available – up to
25ft.
DVR-LX Auxiliary Cable
NOTE: Optional for Cross-Band, Ordering
Code DDN9031
DVR-LX Power Cable
MSU to In-Band Filtering RF Cable
NOTE: For In-Band with non APX8500
MSU to In-Band Filtering RF Cable
NOTE: For In-Band with APX8500
DVR-LX to Duplexer RX/TX Cables
NOTE: For Flat Mount Duplex, 2 cables
provided
DVR-LX Ant to In-Band Filtering RF
Cable
NOTE: For VHF/UHF In-Band
RF Switch Cable
NOTE: For In-Band
27