Table of Contents
Advertisement
Understanding the Error Messages
Once you are familiar with the types of errors that can occur while
™
you're using the PhotoCapture Center
, you can easily identify and
troubleshoot any difficulties.
When an error message appears on the LCD, the DCP will beep to
get your attention.
This message will appear if you insert a media card
MEDIA ERROR
—
that is either bad or not formatted, or when there is a problem with
the media drive. To clear this error, take out the media card.
This message will appear if you select PHOTOCAPTURE
—
NO FILE
and the media card in the drive (slot) does not contain a .JPG file.
This message will appear if you are working with
OUT OF MEMORY
—
images that are too large for the DCP's memory.
™
WALK-UP PHOTOCAPTURE CENTER
6 - 20
Advertisement
Table of Contents
