Using Your Dcp With A Macintosh; Setting Up Your Usb-Equipped Apple; Macintosh; G4, Imac ™ Or Ibook ™ With Mac Os 8.6-9.2 Or Mac Os X 10.1/10.2.1 Or Greater - Brother DCP-4020C User Manual

13
Using your DCP with a

Macintosh

Setting up your USB equipped Apple
Macintosh
with Mac OS 8.6-9.2 or Mac OS X
10.1/10.2.1 or greater
Before you can connect the DCP to your Macintosh
buy a USB cable that is not longer than 1.8 metres.
Do not connect the DCP to a USB port on a key board or a
non-powered USB hub.
The features supported by the DCP will depend on the operating
system you are using. The chart below shows which features are
supported.
Feature
Printing
Scanning (TWAIN)
PhotoCapture Center
*1 You need to download USB Mass Storage Support 1.3.5 from
®
Apple Web site (www.apple.com).
*2 For Mac OS X 10.2 user, please upgrade to Mac OS X 10.2.1 or
greater. (The latest information for Mac OS X, please visit at:
http://solutions.brother.com)

13 - 1 USING YOUR DCP WITH A MACINTOSH

®
®
G3, G4, iMac
MAC OS
8.6
Yes
Yes
* 1
™
or iBook
MAC OS X
9.X 10.1
Yes Yes
Yes No
Yes Yes
®
®
™
®
, you must
10.2.1 or
2
greater*
Yes
Yes
Yes