Using The Scan Key - Brother DCP-4020C User Manual

Using the scan key

You can use the
into your word processing, graphics or E-mail applications or your
computer folder. The advantage of using the
avoid the mouse clicks required to scan from your computer.
If you are using a Macintosh
work only for Scan to Card.
For Scan to E-mail, Scan to Image, Scan to OCR and Scan
to File only
Before you can use the
must have connected the DCP to your Windows
computer and loaded the appropriate Brother Drivers for your
version of Windows
When you are ready to use the
Brother Control Center application is running on your computer.
For details about how to configure the Brother Control Center
buttons to launch the application of your choice using the
Scan to
key, go to the appropriate chapter:
For Windows
Using the Brother Control Center for Windows
98SE/Me/2000 Professional on page 10-1.
For Windows
SmartUI Control Center on page 11-1.
9 - 16 HOW TO SCAN USING WINDOWS
Scan to
key on the control panel to scan originals
Scan to
®
.
®
98/98SE/Me and 2000 Professional, see
®
XP, see Using the Windows
Scan to
®
computer the
key on the control panel, you
Scan to
key, make sure the
®
key is that you
Scan to
key will
®
based
®
98/
®
Based Brother