5
Open the new ink cartridge bag for the colour shown on the
LCD, and then take out the ink cartridge.
6
Each colour has its own correct position. Insert the new ink
cartridge into its carriage by pressing until it clicks.
New Ink Cartridge
7
After installing the ink cartridges, close the ink cartridge cover,
output paper support and scanner cover.
8
If you replaced an ink cartridge while NEAR EMPTY XXXX was
displayed on the LCD, the LCD will ask you to verify that it was
a brand new one. Example: DID YOU CHANGE BLCK? 1.YES
2.NO. For each new cartridge you installed, press
pad to automatically reset the ink dot counter for that colour. If
the ink cartridge you installed is not a brand new one, please be
sure to select 2.
If you wait until INK EMPTY XXXX messages is displayed on the
LCD, the DCP will automatically reset the ink dot counter.
WARNING
If ink gets in your eyes, irrigate them with water immediately and call
a doctor if you are concerned.
15 - 18 TROUBLESHOOTING AND ROUTINE MAINTENANCE
Insert until it clicks
1
on the dial