1. Manuals
  2. Brands
  3. Brother Manuals
  4. All in One Printer
  5. DCP-J315W
  6. Quick setup manual

Brother DCP-J315W Quick Setup Manual

Hide thumbs Also See for DCP-J315W:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Software User Manual
Quick Setup Guide
Start Here
Before you can use the machine, please read this Quick Setup Guide for the correct setup and installation.
WARNING
CAUTION
1
Unpack the machine and check the components
WARNING
Plastic bags are used in the packaging of your machine. To avoid danger of suffocation, please keep
these bags away from babies and children.
a
Remove the protective tape and film covering the machine, and also from the LCD.
b
Remove the plastic bag a containing the ink cartridges from on top of the paper tray.
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death
or serious injuries.
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate injuries.
DCP-J315W
1
CEE-ENG Version 0
1

Advertisement

Table of Contents
loading

Related Manuals for Brother DCP-J315W

Summary of Contents for Brother DCP-J315W

  • Page 1 Quick Setup Guide Start Here DCP-J315W Before you can use the machine, please read this Quick Setup Guide for the correct setup and installation. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death WARNING or serious injuries.
  • Page 2 Fan the stack of paper well to avoid paper jams Attachment of the cover and misfeeds. of the control panel Check that the paper is flat in the tray. Attach the cover of the control panel to the IMPORTANT machine. DO NOT push the paper in too far.

  • Page 3: Connect The Power Cord

    Connect the power cord Install the ink cartridges CAUTION IMPORTANT DO NOT connect the USB cable yet (if you are If ink gets in your eyes, wash them out with water using a USB cable). at once, and if irritation occurs consult a doctor. Connect the power cord.

  • Page 4: Check The Print Quality

    Take care to match the colour of the lever with Set the date and time the cartridge colour. Install each ink cartridge in the direction of the arrow on the label. Press Menu. Gently push the ink cartridge until it clicks. After all the ink cartridges are installed close the ink Press a or b to choose Initial Setup.

  • Page 5: Choose Your Connection Type

    Choose your connection type For USB interface cable ® Windows , go to page 6 Macintosh, go to page 8 For Wireless Network ® Windows and Macintosh, go to page 10 Note ® For Windows Server 2003/2003 x64 Edition/2003 R2/2003 R2 x64 Edition/2008/2008 R2, see the Network User’s Guide on the documentation CD-ROM.

  • Page 6: For Usb Interface Users

    ® Windows For USB interface users ® (Windows 2000 Professional/XP/XP Professional x64 Edition/ ® ® Windows Vista /Windows Before you install Connect the USB cable Make sure that your computer is ON and you are logged on with Administrator rights. Install MFL-Pro Suite Put the supplied installation CD-ROM into your CD-ROM drive.
  • Page 7 XML Paper Specification The installation will continue automatically. documents. Please download the latest driver by The installation screens appear one after accessing the Brother Solutions Center at another. http://solutions.brother.com/ IMPORTANT DO NOT cancel any of the screens during the installation.
  • Page 8 Macintosh For USB interface users (Mac OS X 10.4.11, 10.5.x, 10.6.x) Before you install Make sure your machine is connected to the power and your Macintosh is ON. You must be logged on with Administrator rights. Connect the USB cable IMPORTANT IMPORTANT Make sure that the cable does not restrict the...
  • Page 9 Next. Follow the on-screen instructions. Please wait, it will take a few seconds for the software to install. After the installation, the Brother software will search for the Brother device. Choose the machine from the list, and then click OK.

  • Page 10: For Wireless Network Interface Users

    For Wireless Network Users For wireless network interface users Before you begin IMPORTANT If you have previously configured the wireless settings of the machine you must reset the network (LAN) settings before you can configure the wireless settings again. On your machine, press Menu. Press a or b to choose Network and press OK. Press a or b to choose Network Reset, and then press OK.
  • Page 11 For Wireless Network Users Confirm your network environment (Infrastructure Mode) The following instructions will offer two methods for installing your Brother machine in a wireless network environment. If your wireless access point/router does not support Wi-Fi Protected Setup (WPS) or AOSS™, write down the wireless network settings of your wireless access point/router in the area below.

  • Page 12: Connecting The Brother Machine To The Wireless Network

    For Wireless Network Users Connecting the Brother machine to the wireless network Configure the wireless A connection result message appears for 60 seconds on the LCD and a wireless LAN settings (typical Wireless report will automatically be printed. If the...

  • Page 13: Troubleshooting

    For Wireless Network Users Troubleshooting IMPORTANT Please do not contact Brother Customer Service for assistance without the wireless security information. We cannot assist you in locating your network security settings. How can I find the wireless security information (SSID and Network Key) 1) You should see the documentation provided with your wireless access point/router.
  • Page 14 The security information (SSID/Network Key) is incorrect. Reconfirm the SSID and security information (Network Key). If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother TS-05 machine supports the use of the first WEP key only.

  • Page 15: Wireless Network

    WEP key correctly. CD-ROM drive. Follow the on-screen The WEP key is case sensitive. instructions. The installation of the Brother drivers will The CD-ROM Top Menu will appear. Click automatically start. The installation screens Install MFL-Pro Suite and click Yes if you appear one after another.
  • Page 16 • XML Paper Specification Printer Driver The XML Paper Specification Printer Driver is the most suitable driver when printing from applications that use the XML Paper Specification documents. Please download the latest driver by accessing the Brother Solutions Center at http://solutions.brother.com/...
  • Page 17 Center (http://solutions.brother.com/). Choose Wireless Network Connection, and then click Next. The Brother software will search for the Brother device in your wireless network. If the machine is configured for your network, choose the device you want to install, and then click Next.

  • Page 18: Install Optional Applications

    Install Optional Applications ® Windows Install FaceFilter Install FaceFilter Studio Studio/BookScan & Help Whiteboard Suite supported by Reallusion, To run FaceFilter Studio, go to start/All Programs/Reallusion/ FaceFilter Studio on your computer. IMPORTANT Click the button on the upper right corner of the screen. •...

  • Page 19: For Network Users

    For Network Users Restore the network settings to factory default To restore all network settings of the internal Print/Scan server to factory default, please follow the steps below. Make sure the machine is not operating. Press Menu. Press a or b to choose Network. Press OK.
  • Page 20 The contents of this manual and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publication.

Table of Contents