Table of Contents
Advertisement
Replacing the ink cartridges
Your DCP is equipped with an ink dot counter that automatically
monitors the ink level in each colour cartridge. When the counter
detects an ink cartridge is out of ink, the DCP will notify you with a
message INK EMPTY on the LCD.
The LCD shows you which colour cartridges are empty. Be sure to
follow the LCD prompts so you replace the colour cartridges in the
appropriate order.
1
Turn the DCP's power switch off.
2
Pull the scanner cover release lever and lift the scanner cover.
3
Lift the output paper support and open the ink cartridge cover.
Output Paper
Support
4
Remove the ink cartridges that are shown on the LCD.
If one or more ink cartridges are empty, for example Black, the
LCD shows INK EMPTY BLACK and PLS OPEN COVER.
TROUBLESHOOTING AND ROUTINE MAINTENANCE 15 - 17
Empty Ink Cartridge
Ink Cartridge Cover
Advertisement
Table of Contents
