Table of Contents
Advertisement
The DCP can only read one Media card at a time so do not insert
more than one card. The settings that you want to use with the card
will be kept until you take out the media card from the drive (slot),
print images or press
1
Insert the media card firmly into the media drive (slot).
2
When you insert your media card
into the proper slot, the LCD shows.
The media active message will be shown for 60 seconds and
then the display will return to standby mode.
Even in that case, you can enter the Photo Capture mode by
Photo Capture
pressing
3
Options
Press
The LCD shows:
(See Changing the settings for
printing images on page 6-8.)
6 - 5 WALK-UP PHOTOCAPTURE CENTER
Stop/Exit
.
.
.
C.FLASH ACTIVE
Press PhotoCapture for ---
CHANGE SETTINGS
NO. OF COPIES:01
™
Advertisement
Table of Contents
