Hemstitching 2 - Brother CS-8072 Operation Manual

Hemstitching 2

1 2
25 26 25 27 28
1
5. Illustration of finished product.
1. Press the
stitch pattern switch key to select the stitch for hemstitching.
* Check that the stitch pattern switch key's LED lamp is lit.
29 30
1 Lamp is lit
2 Lamp is lit
2. Pull out several threads from both sides of the 4 mm (3/16'')
area which is not yet open. (Pull out four threads, leave five
threads and then pull out four threads, the width of five threads
is approximately 4 mm (3/16'') or less.)
1 Approx. 4 mm (3/16'') or less
2 Four threads (pull out)
3 Five threads (leave)
3. Sew the decorative stitch on the center of the five threads cre-
ated above.
* Using a wing needle is an option.
4. Illustration of finished product.
27 28
key to turn on the LED lamp, and press the
63