Brother CS-8072 Operation Manual page 71

5
6
5
6
1
1
2
1 2
4. Remove the race.
* While pushing the race towards the back of the
machine, lift the edge nearest you and remove
the race.
1 Race
1
5. Remove accumulated lint and thread from the
inner shuttle and race with a brush or vacuum
cleaner.
* Do not oil the shuttle or the race.
2
1 Shuttle
2 Brush
6. Check that the notch on the shuttle is in the
same position as when you removed the race.
Position the race so that the shelf and spring
are aligned, and insert the race.
CAUTION
• Do not use a damaged race or shut-
tle. Otherwise, the thread may tangle
and cause a poor finish, or the nee-
dle may break. You can get the prop-
er parts from your authorized dealer.
• Be sure to insert the race in the cor-
rect position. Otherwise, the needle
may break.
1 Shelf
2 Spring
7. Reattach the needle plate.
68