Brother CS-8072 Operation Manual page 17

2
1
1
2
1
5
1
2
4. While holding the end of the thread with your left hand, pass
the thread through the guides in the order shown by the num-
bers.
Note
- If the thread is pushed down at 1 to make it taut, it can be
passed around the other thread guides more easily.
- Incorrectly feeding the thread will result in faulty sewing.
Threading the take-up lever
4
5. Lower the presser foot.
6. Guide the thread through the needle clamp thread guide.
1 Needle clamp thread guide
7. When using the auto-threading device, gently pull the thread
towards you.
1 Needle threader lever
2 Guide (Large hook)
* Lowering the presser foot will engage the automatic tension
and will allow you to grip the thread as you proceed.
1 Thread take-up lever
1
14