Table of Contents
Advertisement
MAINTENANCE
CLEANING THE MACHINE
CAUTION
Be sure to unplug the machine before cleaning it. Otherwise, electric shock or injury may
result.
Cleaning the operation panel
If the operation panel is dirty, gently wipe it with a soft, dry cloth. Do not use organic solvents or detergents.
Cleaning the machine casing
If the surface of the machine is dirty, lightly soak a cloth in a neutral detergent, squeeze it out firmly and then
wipe the surface. Then wipe again with a dry cloth.
Cleaning the race and shuttle
If dust or bits of dirt collect in the race or shuttle, the machine will not run well. Keep the machine clean for best
results.
5
5
6
1
6
1
2
1. Turn off the power. Remove the presser foot
holder and the needle.
2. Loosen the screws with the disc-shaped screw-
driver and remove the needle plate.
1 Needle plate
3. Turn the balance wheel, and align the notch of
shuttle a little to the left of the shelf of race, as
shown.
CAUTION
Be sure to turn the balance wheel towards the
front of the machine. Turning the balance
wheel in the other direction may damage the
machine.
1 Notch of shuttle
2 Shelf of race
67
Hide quick links:
Advertisement
Table of Contents
