Changing The Light Bulb - Brother CS-8072 Operation Manual

CHANGING THE LIGHT BULB

CAUTION
• Turn off the main power switch and unplug the machine before changing the light bulb. If
the machine is on and the "Start/Stop" button is pressed accidentally, injuries may result.
• To avoid burns, give the light bulb time to cool before changing it.
1
1. Turn off the main power switch.
2. Use a screwdriver to loosen the screw on the back of machine
light cover. Then remove the light cover.
1 Screw
2 Light cover
2
3. Remove the light bulb as shown, and align the projection on
the light bulb with the notch in the socket. Replace it with a new
light bulb.
CAUTION
Use only light bulbs intended for use with this machine
(12V/ 5W: part no. XA2037001). You can get the proper light
bulb at your authorized dealer.
4. Replace light cover and tighten the screw on the back of the
machine.
69