Sewing Stretch Fabrics; Changing The Stitch Length; Changing The Needle Position; Straight Stitch (Left) And " " Triple - Brother CS-8072 Operation Manual

Sewing stretch fabrics

6

Changing the stitch length

1
2
Changing the needle position (only "
1
2
Baste the fabric pieces together, then sew along the basting with-
out pulling the fabric.
5
* Do not pull the fabric while sewing.
1 Basting
1
Press the stitch length manual change key to light up the LED
lamp. Move the stitch length adjustment lever up or down to ad-
just the stitch length.
1 Up: Longer
1
2 Down: Shorter
* For thin material which is less than 1.0 mm (1/16") thick, the
maximum stitch length will automatically be set to 4.0 mm (3/
16") while sewing, even if the length setting is longer than
4.0 mm (3/16").
2
1
" straight stitch (left) and "
Press the stitch width manual change key to light up the LED
lamp. Move the stitch width adjustment lever up or down to adjust
the needle position.
1 Up: 7.0 mm (1/4") [right needle position]
1
2 Down: 0 mm (0") [left needle position]
* The needle position cannot be changed in the straight stitch
(middle) setting.
2
5
" triple stretch stitch)
35