Pintuck - Brother CS-8072 Operation Manual

PINTUCK

2
I
For decorating blouses, etc.
1. Mark along the folds on the wrong side of the fabric.
1 Wrong side of fabric
2. Fold the fabric so that the right side faces upward and iron
only the folded parts.
1 Right side of fabric
3. Attach the right pin of presser foot "I" to the holder, and sew a
straight stitch along each fold.
1 Width for pintuck
2 Wrong side of fabric
3 Right side of fabric
CAUTION
When using zipper foot "I", make sure the straight
stitch, middle needle position is selected. Turn the
balance wheel to make sure the needle does not
strike the presser foot. If another stitch is selected,
the needle will strike the presser foot, causing the
needle to break and possible leading to injury.
4. Iron all folds in the same direction.
I
54