Brother CS-8072 Operation Manual page 53

1
4
1
2
6
5. Close the zipper, turn the fabric over, and sew a basting stitch.
1 Front of the skirt (wrong side of fabric)
2 Basting stitches
3 Front of the skirt (right side of fabric)
4 Back of the skirt (right side of fabric)
2
3
6. Remove the presser foot, and reattach it so that the left side of
the pin is attached to the presser foot holder.
3
1 Right
2 Left
3 Needle drop position
7. Set the fabric so that the left edge of the presser foot touches
the edge of the zipper teeth. Sew reverse stitches at the top of
the zipper, then continue sewing. Stop sewing about 50 mm
(2'') from the edge of the fabric, leave the needle in the fabric,
and remove the basting stitches. Open the zipper and sew the
rest of the seam.
1 Basting stitches
2 7 to 10 mm (1/4'' to 3/8'')
3 Reverse stitches
4 50 mm (2'')
50