Replacing The Presser Foot; Presser Foot Precautions - Brother CS-80 Operation Manual

S2_brotherE.book Page 35 Thursday, February 13, 2003 11:03 AM

Replacing the Presser Foot

The presser foot presses down on the fabric.

Presser foot precautions

Be sure to observe the following precautions concerning the presser feet.
CAUTION
G
Use the presser foot appropriate for the type of stitch that you wish to sew, otherwise the
needle may hit the presser foot, causing the needle to bend or break.
G
Only use presser feet designed specifically for this sewing machine. Use of any other presser
foot may result in injuries or damage to the machine.

Replacing the presser foot

Replace the presser foot as described below.
For details on using the side cutter " S" , refer to
" Sewing overcasting stitches using the optional side
cutter" (page 62).
Press (needle position button) once or
1
twice to raise the needle.
1
1 Needle position button
The needle is raised.
2 Turn off the sewing machine.
CAUTION
G
Before replacing the presser foot, be sure
to turn off the sewing machine, otherwise
injuries may occur if the start/stop
button is accidentally pressed and the
machine starts sewing.
3 Raise the presser foot lever.
1
1 Presser foot lever
The presser foot is raised.
Replacing the Presser Foot
1
35