Brother CS-80 Operation Manual page 54

S2_brotherE.book Page 48 Thursday, February 13, 2003 11:03 AM
SEWING BASICS ————————————————————————————————————————————————————————
7 After 3 to 5 reverse stitches have been sewn,
release (reverse/reinforcement stitch
button).
The machine stops sewing.
8 Press (start/stop button), or press down
on the foot controller.
At this time, if the start/stop button is held
pressed, the machine sews at a low speed.
The machine starts sewing in the normal
sewing direction.
9 After sewing to the end of the stitching, the
sewing machine stops.
Release the start/stop button or foot controller.
3
4
1 Beginning of stitching
2 End of stitching
48
1
1
2
5
6
2
I Sewing reinforcement stitches
When sewing stitches other than straight or zigzag
stitches that are secured with reverse stitching,
pressing (reverse/reinforcement stitch
button) sews reinforcement stitches, 3 to 5 stitches
on top of each other.
1
1 Reverse stitching
2 Reinforcement stitching
Memo
G Whether reverse stitches or reinforcement
stitches are sewn depends on the stitch that
is selected. For details, refer to " Stitch
Settings" (page 96).
2