Brother CS-80 Operation Manual page 90

S2_brotherE.book Page 84 Thursday, February 13, 2003 11:03 AM
UTILITY STITCHES ———————————————————————————————————————————————————————
4 Slide the drop feed lever, located at the rear
of the machine on the base, to
right as seen from the front of the machine).
1
1 Feed dog position switch
(as seen from the rear of the machine)
The feed dogs are lowered.
5 Turn on the sewing machine, and then select a
stitch.
• For details, refer to " Selecting stitching"
(page 58).
Use both hands to stretch the fabric taut, and
6
then move the fabric to follow the pattern.
Reinforcement stitches are sewn at the
beginning and end of sewing.
1 Pattern
84
7 After sewing is finished, slide the drop feed
(to the lever to
front of the machine) to raise the feed dogs.
• Normally, the drop feed lever is positioned
at the left.
1
(to the left as seen from the