Replacing The Presser Foot - Brother 888-L01 Operation Manual

Replacing the Presser Foot

CAUTION
• Use the presser foot appropriate for the type
of stitch that you wish to sew, otherwise the
needle may hit the presser foot, causing the
needle to bend or break.
• Only use presser feet designed specifically for
this machine. Use of any other presser foot
may result in injuries or damage to the
machine.
Replacing the presser foot
Press (Needle position button) once or twice to
a
raise the needle.
Press .
b
→ The screen changes, and all keys and operation
buttons are locked (except
c Raise the presser foot lever.
d Press the black button at the back of the presser foot
holder in order to remove the presser foot.
a
b
1 Black button
2 Presser foot holder
e
f
).
g
h
Replacing the Presser Foot
Place a different presser foot below the holder so that
the presser foot pin is aligned with the notch in the
holder.
1
2
3
1 Presser foot holder
2 Notch
3 Pin
4 Presser foot type
Slowly lower the presser foot lever so that the presser
foot pin snaps into the notch in the presser foot holder.
1
1 Presser foot lever
2 Presser foot holder
3 Notch
4 Pin
→ The presser foot is attached.
Raise the presser foot lever to check that the presser
foot is securely attached.
1
1 Presser foot lever
Press to unlock all keys and buttons.
Basic operations B-33
4
J
2
3
4
B