Maintenance; Cleaning The Machine Surface; Cleaning The Shuttle - Brother CS-80 Operation Manual

S2_brotherE.book Page 100 Thursday, February 13, 2003 11:03 AM
APPENDIX ——————————————————————————————————————————————————————————

Maintenance

Simple sewing machine maintenance operations are described below.
Cleaning the machine
surface
If the surface of the machine is dirty, lightly soak a
cloth in neutral detergent, squeeze it out firmly, and
then wipe the surface of the machine. After cleaning
it once with a wet cloth, wipe it again with a dry
cloth.
CAUTION
G
Unplug the power supply cord before
cleaning the machine, otherwise injuries
or an electric shock may occur.
100

Cleaning the shuttle

Sewing performance will suffer if dust collects in the
shuttle; therefore, it should be cleaned periodically.
1 Turn off the sewing machine.
CAUTION
G
Unplug the power supply cord before
cleaning the machine, otherwise injuries
or an electric shock may occur.
2 Grasp both sides of the needle plate cover,
and then slide it toward you.
1 Needle plate cover
The needle plate cover is removed.
1