Analog Devices EVAL-ADAQ4001FMCZ User Manual page 10

User Guide
EVALUATION BOARD SOFTWARE
4. The Computer Management window opens. In the list labeled
System Tools, click Device Manager. If the
software is installed, and the board is properly connected to
the PC, Analog Devices SDP-H1 is shown in the ADI Devel-
opment Tools list in the Device Manager window, as shown in
Figure 15.
Figure 15. Device Manager Window
analog.com
Disconnecting the EVAL-ADAQ4001FMCZ or
SDP-H1 driver
EVAL-ADAQ4003FMCZ
Disconnect power from the SDP-H1 or press the reset tact switch
located alongside the mini USB port on the SDP-H1 before dis-
connecting the EVAL-ADAQ4001FMCZ or EVAL-ADAQ4003FMCZ
from the SDP-H1.
UG-1533
Rev. A | 10 of 30