Navigating The Terminal Menu; Terminal Menu Window - ADTRAN TRACER 5045 System Manual

Section 5 User Interface Guide
1.

NAVIGATING THE TERMINAL MENU

The TRACER 5045 menu system can be accessed with a VT100 compatible terminal that is connected to
the RS-232 port located on the back of the unit and set to 9600 bits per second, 8 data bits, 1 stop bit, and
no parity. Flow control on the serial interface should be configured to
terminal is connected, press <Ctrl + L> to refresh the current screen. If password access has been enabled,
the message displays at the bottom of the TRACER 5045 System Status menu.
E P
NTER ASSWORD
All TRACER 5045 systems are shipped factory default with password protection disabled.

Terminal Menu Window

The TRACER 5045 uses a series of menu pages and a single main menu page to access its many features.
The main menu page (see Figure 1) provides a link to all available configuration/status pages.
After connecting a VT100 terminal to the TRACER 5045, press <Ctrl + L> to redraw the
current screen.
40
Figure 1. Main Menu Screen
© 2003 ADTRAN, Inc.
TRACER 5045 System Manual
for proper operation. Once a
N
ONE
612805045L1-1A