ADTRAN TRACER 5045 System Manual page 45

TRACER 5045 System Manual
>TRACER S
YSTEM
Figure 4 shows the TRACER 5045 System Configuration menu page. System configuration parameters for
both the local and remote TRACER 5045 units are available through this menu page.
Press <1> from any menu in the TRACER 5045 VT100 menu structure to access the
TRACER System Configuration menu page.
>TRACER S
YSTEM
Displays the approximate receiver levels (for both the local and remote units) using a series of symbols (
The more symbols ( ) displayed, the stronger the signal. If the link is down and remote end data is
#
unavailable,
D N
ATA OT
>TRACER S
YSTEM
Allows the transmitter levels (for both the local and remote units) to be adjusted. The current transmitter
level is displayed using a series of symbols (
the link is down and remote end data is unavailable,
( ).
#
Reducing the transmitter power of the remote TRACER 5045 could negatively impact the
TRACER RF link.
612805045L1-1A
C
ONFIGURATION
Figure 4. TRACER 5045 System Configuration
C > RX P
ONFIGURATION
displays in place of the symbols (
A
VAILABLE
C > TX P
ONFIGURATION
). The more symbols (
#
© 2003 ADTRAN, Inc.
Section 5 User Interface Guide
OWER
). This parameter is display only.
#
OWER
) displayed, the stronger the signal. If
#
displays in place of the symbols
D N A
ATA OT VAILABLE
).
#
45