ADTRAN Total Access 5006 Specification Sheet

Kit Contents

Total Access 5006 Assembly, including:
1187003E1 Total Access
■
5006 chassis
1187052E1 SMIO-3 Switch
■
module backplane
1187090E1 Fan module assembly
■
1187410L1 Backplane modules
■
for RJ-21 cables (quantity = three
for six cables)
Cabinet Cooling Kit
Attaches to roof of cabinet
■
with existing hardware
Supports one Total Access 5006
■
Adds speed control and
■
alarm functionality
Replaces existing fan to extend
■
usable life of the OSP enclosure
Valere Power System, including:
®
19-inch, 2U compact
■
integrated system
BC-500 system controller module
■
10 amp rectifier modules
■
(quantity = two)
Alarm and power cables
■
2U Breaker Panel
■
RJ-21 extension cables, to allow
■
use of existing primary protection
Fiber Termination Equipment including:
Bulkhead bracket
■
Fiber bulkhead connectors
■
(FC and SC type)
Fiber jumpers
■
Total Access 5006 Cabinet Retrofit Kit
for AFC 120
®
With the demand for higher-bandwidth
services growing at a phenomenal rate, it
is more important than ever to be able to
leverage existing infrastructure in the
delivery of new services. Time to market is
crucial and network redesign or new cabinet
deployment is simply not an option. The solu-
tion is cabinet revitalization. The ADTRAN
Total Access 5006 Multiservice Access and
®
Aggregation Platform is the best solution for
revitalizing existing cabinet infrastructure to
deploy higher-bandwidth, next-generation
services easily and cost effectively.
Why Retrofit?
Cost is the major barrier to the deployment
of new services. The average total cost of
placing a new cabinet could approach
$50,000, while the average retrofit costs less
than one-third of the price of a new installa-
tion. Thousands of small line count cabinets,
originally deployed for Plain Old Telephone
Service (POTS), are not equipped to handle
the thermal and power requirements for the
deployment of high- bandwidth services.
However, retrofitting provides a complete
solution for next-generation deployment,
while eliminating the costs associated with
new cabinet fees, cabinet installation,
powering, and right-of-way negotiation.
Retrofitting minimizes capital expenditures
and speeds service deployment. When
compared to a new installation, retrofitting
allows you to upgrade three times as many
cabinet sites with the same amount of money.
Total Access 5006
ADTRAN's Total Access 5006 is the perfect
retrofit solution for your growing network.
This carrier-class Multiservice Access and
Aggregation Platform was designed with
retrofit applications in mind. Its small form-
factor makes it ideally suited for cabinet
revitalizations. With a pure Ethernet core,
®
the Total Access 5006 supports both legacy
and emerging service interfaces over copper
and fiber, easily scaling to support even the
most bandwidth-intensive applications, like
Internet Protocol (IP) TV and video. It provides
a clear migration path for traditional services
like voice through its flexible network uplink
options, including support for both TDM
and Voice over IP switches. In addition to
supporting both traditional and next-genera-
tion access interfaces, the Total Access 5006
has an Ethernet core providing a scalable and
cost-optimized aggregation point in the
network, with interfaces ranging from DS1 to
Gigabit Ethernet. The Total Access 5006 is one
of the most flexible platforms on the market
today, not only allowing you to deliver DSL
and POTS, but a variety of next-generation
services for future growth.
Smart Solutions for a
Connected World.