Terminal Modes Menu; Figure 16. Terminal Modes Menu - ADTRAN T200 HTU-R Installation And Maintenance Manual

Terminal Modes Menu

The Terminal Modes menu, illustrated in
HTU-R, SP/60 mA terminal emulation mode. The HTU-R includes two terminal emulation
modes as described on the Terminal Modes menu. The Manual Update Mode (default) allows
the user to manually update the provisioning option screens. This mode provides efficient
print screen and log file utilities for storage of key provisioning parameters, alarm or perfor-
mance history and current system status. By tapping the space bar three times, the screen
will be refreshed and will reflect the most current circuit conditions and provisioning options.
The second terminal emulation mode is the Real- Time Update Mode (VT100). This mode
provides real-time updating of HDSL circuit conditions and provisioning options as changes
occur. While in Real-Time Update mode, the unit is anticipating baud poll responses from the
terminal. If a terminal response is not detected (i.e., terminal is disconnected), the unit will
revert back to the Manual Update Mode (default).
Circuit ID:HNTSVLALHDSL
MANUAL UPDATE MODE:
* You can print or log screens
* No text is highlighted
* "3 SPACES TO UPDATE" appears at the top of each screen,
reminding you to press 3 spacebars to update the screen
* There is a delay between screen changes & updates
* After 30 min. of no interaction, a new baud rate search is begun
* Ignores input until screen is finished printing.
REAL-TIME UPDATE MODE:
* Faster of the two modes
* You cannot print screens to a log file
* Highlighting is enabled
* Recommended for daily operation
61247026L1-5A
Figure
TERMINAL MODES MENU
Press "T" to toggle between the terminal modes.
Press "M" to return to the main menu.

Figure 16. Terminal Modes Menu

16, provides the ability to select the T200
MM/DD/YY hh:mm:ss
Menu Descriptions
29