Alto-Shaam 300-TH/III Manuallines page 12

To stop an operation at any time :
Press and hold the s
tart
for two seconds, indicating the operation has been
cancelled. The oven will remain in a power-on state.
To turn oven control panel off:
Press and hold the o /o
n
The O /O indicator light will go out.
n ff
Door open indicator:
Display will flash "door" and a triple beep will alert
the user. Press O /O
n ff
and disable triple beep.
Door lock:
Whenever the oven is in the c
mode prior to set time timing down to 0, the door
will lock 5 seconds after the door is closed.
Door Lock Time
When in a preheat mode, pressing the h
while the hold temperature is displayed will toggle
to the door lock time.
Door lock override
When the door lock is engaged, press and hold the
c and the h buttons simultaneously for 5
ook old
seconds. The door lock will disengage for 5 seconds
to allow the user to open the door. The door lock
will reengage 5 seconds after the door is closed.
Arrow Keys:
Cook, Hold and Probe Temperature, and the Time
setting can be adjusted by pressing the Arrow keys.
Pressing and releasing the Arrow key will change
settings in increments of one. To change a setting
more rapidly, press and hold the Arrow key. Once
the setting reaches a number divisible by 10, it will
begin to increase in increments of 10.
Green and Amber Indicators:
Each program key includes a green
light which indicates a requirement
for additional programming by the
operator or the current operational
state of the oven.
The c , t , p
ook ime rob e
amber indicator light to identify the information
being displayed.
GE N ER A L OP ER A T IO N - DEL UX E C ON TRO L OV EN S
operaTi ng Fe aTure S & Fun CT io nS
key until the control beeps
key until the oven beeps.
ff
key to acknowledge error
mode or h
ook
key
old
green
Amber
, and h keys include an
old
cooking guidelines
Power Fail Detect:
If the power were to fail for any reason while
heating, the control will retain, in memory, the
programmed operating conditions. When power
is restored, the control will resume operating from
the point where it was interrupted and the O
indicator light will flash, indicating that such an
event did occur. The operator can acknowledge the
power failure by pressing the O
the key will display the amount of time that the
power has been off. The control will stop counting
the amount of time the power has been off when it
has been off for more than 24 hours.
NoTE: if such an event has occurred, it is strongly
recommended that you ensure the food is safe for
old
consumption according to local health regulations.
To set date and time:
All oven cavities must be turned OFF.
To set Time (HH:mm) - press and hold "A" key for
three seconds. Press UP/Down Arrow key to
set Time.
To set Year - press and hold "B" key for three
seconds. Press UP/Down Arrow key to set Year.
To set month and day (mm.dd) = press "C" key for
three seconds. Press UP/Down Arrow key to set
Month and Day.
-
deluxe control
OP ERA TIO N
/O
n
•
9
/O
n ff
key. Pressing
ff