Table of Contents
Advertisement
ALM-04-MRTU User's Manual
Mode 6:
Binary Trigger- Hold Repeat Playback
DI1 to DI4 are used as binary input, max 15 channels.
When alarm in playback process, only highest binary channel priority can break & take place
the previous playback.
Playback will repeat when input are not release & will stop immediately when input released.
When multi trigger in same time the highest binary channel priority will take place, DI4 is the
most highest channel.
Mode 7:
Binary Trigger- Memory Once Playback
DI1 to DI4 are used as binary input, max 15 channels.
When alarm in playback process, any trigger input will memory once for next playback.
In this mode, it only playback once, even the input is not release.
The highest binary channel priority input will take place after the previous playback complete,
DI4 is the most highest channel.
ALM-04-MRTU
Figure 3-14: ALM-04-MRTU Mode 6
Figure 3-15: ALM-04-MRTU Mode 7
User's Manual (Rev1.0, Jan./2020) ------------- 22
Advertisement
Table of Contents
